View MN101C46F_1145239.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

MN101C46F
Type ROM (x 8-bit) x RAM (x 8-bit) x Package (Conventional Package) Minimum Instruction Execution Time Interrupts Timer Counter Serial Interface Caption I/O Pins A/D Inputs PWM Special Ports CRTC Notes I/O
MN101C46F 96 K 3K SDIP042-P-0600C *Lead-free (SDIP042-P-0600) 279 ns (at 3.0 V to 3.6 V, 14.32 MHz) External (6 lines) Internal (12 lines) : Timer x 3, A/D, OSD, I 2C, Caption x 4, Remote control, Watchdog 8-bit timer x 3 Watchdog timer: system clock fs 1/216, 1/218, 1/220 triple selection I2C x 1: for multimaster mode, bus line (output) has 2 systems * Built-in sync separator x 2 35 * Common use 5-bit x 8-ch. (with S/H) 8-bit x 6-ch. , 14-bit x 1-ch. Remote control reception 1-layer display (graphics, characters) Remote control input discriminant circuit built-in
1
MAD00026CEM
MN101C46F
Pin Assignment
IRQ0,RMIN,P00 *1 SDA1,P01 *1 SCL1,P02 IRQ1,ADIN0,P03 ADIN1,P04 ADIN2,P05 ADIN3,P06 ADIN4,P07 ADIN5,P10 ADIN6,P11 ADIN7,P12 *3 MMOD SYSCLK,P13 *1 PWM0,P14 PWM1,P15 PWM2,P16 IRQ2,PWM3,P17 IRQ3,PWM4,P20 *1 IRQ4,PWM5,P21 VDD CLL,P22
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21
MN101C46F
(
42 41 40 39 38 37 36 35 34 33 32 31 30 29 28 27 26 25 24 23 22
) : Conventional Package
VSS OSC2 OSC1 VDD(VPP) *2 P42,SCL0 *1 P41,SDA0 *1 P40,PWM P37,NVSYNC,IRQ5 P36,NRST P35,YM P34,ROUT P33,GOUT P32,BOUT P31,YS FLASH *4 P30,NHSYNC P27,VREFH0 P26,CVBS0 P25,CVBS1 P24,VREFH1 P23,CLH
SDIP042-P-0600C
*Lead-free
(SDIP042-P-0600)
*1: 5 V dielectric Nch open drain output pin *2: MN101C46F (VDD), MN101CF46F (VPP) *3: MMOD = H (fixed) (Set the test mode pin to the normal mode.)
Support Tool
In-circuit Emulator EPROM Built-in Type
Type
*4: FLASH = L (fixed) (Set the flash mode pin to the normal mode.) PX-ICE101C/D+PX-PRB101C46-SDIP042-P-0600-M MN101CF46F [ES (Engineering Sample) available] 96 K 3K 279 ns (at 3.0 V to 3.6 V, 14.32 MHz) SDIP042-P-0600C *Lead-free (SDIP042-P-0600)
ROM (x 8-bit) RAM (x 8-bit) Minimum instruction execution time Package (Conventional Package)
MAD00026CEM
2
Request for your special attention and precautions in using the technical information and semiconductors described in this material
(1) An export permit needs to be obtained from the competent authorities of the Japanese Government if any of the products or technologies described in this material and controlled under the "Foreign Exchange and Foreign Trade Law" is to be exported or taken out of Japan. (2) The technical information described in this material is limited to showing representative characteristics and applied circuits examples of the products. It neither warrants non-infringement of intellectual property right or any other rights owned by our company or a third party, nor grants any license. (3) We are not liable for the infringement of rights owned by a third party arising out of the use of the product or technologies as described in this material. (4) The products described in this material are intended to be used for standard applications or general electronic equipment (such as office equipment, communications equipment, measuring instruments and household appliances). Consult our sales staff in advance for information on the following applications: * Special applications (such as for airplanes, aerospace, automobiles, traffic control equipment, combustion equipment, life support systems and safety devices) in which exceptional quality and reliability are required, or if the failure or malfunction of the products may directly jeopardize life or harm the human body. * Any applications other than the standard applications intended. (5) The products and product specifications described in this material are subject to change without notice for modification and/or improvement. At the final stage of your design, purchasing, or use of the products, therefore, ask for the most up-to-date Product Standards in advance to make sure that the latest specifications satisfy your requirements. (6) When designing your equipment, comply with the guaranteed values, in particular those of maximum rating, the range of operating power supply voltage, and heat radiation characteristics. Otherwise, we will not be liable for any defect which may arise later in your equipment. Even when the products are used within the guaranteed values, take into the consideration of incidence of break down and failure mode, possible to occur to semiconductor products. Measures on the systems such as redundant design, arresting the spread of fire or preventing glitch are recommended in order to prevent physical injury, fire, social damages, for example, by using the products. (7) When using products for which damp-proof packing is required, observe the conditions (including shelf life and amount of time let standing of unsealed items) agreed upon when specification sheets are individually exchanged. (8) This material may be not reprinted or reproduced whether wholly or partially, without the prior written permission of Matsushita Electric Industrial Co., Ltd.
2002 JUL

▲Up To Search▲

Price & Availability of MN101C46F

	To Download MN101C46F Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .